Faceman🇦🇺

I use Plexamp for that, Jellyfin does it too. You can assign libraries per user quite easily.

So for 3 users you might have 4 libraries, one per user then a shared library they all have access to.

Soulseek has been getting hammered too

the 2.5" size of disks are now mostly direct USB controller disks rather than sata adapters internally.

3.5" disks are still SATA as far as i’ve seen but the actual sku’s of the disks are often the lower grades. like you will get a disk that looks like another good disk but with only 64mb of dram instead of 256 on the one you would buy as a bare internal drive for example so they can end up a bit slower. and warranties are usually void.

Used to be my main source of disks, but these days there are better ways and it is easier to know exactly what you are getting.

Israel making an awful lot of “mistakes” lately…

Are you transcoding?

4mbit per client for 1080 is generally a workable minimum for the average casual watcher if you have H265 compatible clients (and a decent encoder, like a modern intel CPU for example), 6 - 8mbit per client if its H264 only.

Remember that the bitrate to quality curve for live transcoding isn’t as good as a slow, non-real-time encode done the brute force way on a CPU. so if you have a few videos that look great at 4mbit, dont assume your own transcodes will look quite that nice, you’re using a GPU to get it done as quickly as possible, with acceptable quality, not as slowly and carefully as possible for the best compression.

You’re confusing a container format (MKV) with a video codec (AV1)

MKV is just a container like a folder or zip file that contains the video stream (or streams, technically you can have multiple) which could be in H264, H265, AV1 etc etc, along with audio streams, subtitles and many other files that go along, like custom Fonts, Posters, etc etc.

As for the codec itself, AV1 done properly is a very good codec but to be visually lossless it isn’t significantly better than a good H265 encode without doing painfully slow CPU encodes, rather than fast efficient GPU encodes. people that are compressing their entire libraries to AV1 are sacrificing a small amount of quality, and some people are more sensitive to its flaws than others. in my case I try to avoid re-encoding in general. AV1 is also less supported on TVs and Media players, so you run into issues with some devices not playing them at all, or having to use CPU decoding.

So I still have my media in mostly untouched original formats, some of my old movie archives and things that aren’t critical like daily shows are H265 encoded for a bit of space saving without risking compatibility issues. Most of my important media and movies are not re-encoded at all, if I rip a bluray I store the video stream that was on the disk untouched.

N5095 ? lots of reports of that one not supporting everything it should based on other Jasper Lake chips, CPU getting hit for Decode when it shouldn’t for example. Also HDR to SDR cant be accelerated with VPP on that one as far as I know so the CPU gets smashed. I think you can do it with OpenCL though.

Was it an n100? They have a severely limited power budget of 6w compared to the n95 at 25w or so.

I’m running jellyfin ontop of ubuntu desktop while also playing retro games. That all sits in a proxmox vm with other services running alongside it. It’s perfectly snappy.

One of my miniPCs is just a little N95 and it can easily transcode 4K HDR to 1080p (HDR or tonemapped SDR) to a couple of clients, and with excellent image quality. You could build a nice little server with a modern i3 and 16gigs of ram and it would smash through 4 or 5 high bitrate 4K HDR transcodes just fine.

Is that one transcoding client local to you? or are you trying to stream over the web? if it’s local, put some of the budget to a new player for that screen perhaps?

I’ve had good luck with WD Blue NVME (SN550)

I’ve put several of those into machines at work and have had years without an issue. I’m also running a WD Blue SN550 1TB in my server as one of the caches, 25000 hours power on time, >100TB written, temperatures way higher than they should be and still over 93% health remaining according to smart.

Gets even weirder when you see LGs webOS kinda started out as PalmOS

I have seen some talk over on XDA forums, but since there is more to an android TV than just the basic android OS, it’s a bit trickier without risking losing licences/compatibility/DRM/features.

Some older LG webOS tvs can be rooted and custom apps installed too such as ad free youtube players etc.

Not sure if there’s a list, but most Android based TVs can be cleaned and modded to some degree via ADB. If you can access the dev settings in android, chances are you can do a lot to make it better, strip out some google or branded packages, replace the launcher to block OS level ads etc. Projectivy usually works well since it supports input switching on many devices, but it’s still better to do all of this to a separate box and then plug it into a TV that is firewalled/filtered/offline. more control and less to fuck up.

Rooting and unlocking bootloaders is more complex as these android devices dont have normal recovery systems and require a lot of custom drivers to make the video and audio processing work, so it’s not worth going that far.

LCDs do tend to speak somewhat standardised languages, but there is a lot more to a modern TV than just an LCD controller.

Color and white balance calibration, image/motion processing, HDR Processing, backlight control/dimming zones, input management, audio decoding/encoding/passthrough, digitizing analogue sources, HDMI licencing, Dolby licencing, etc.

If you want a better smart TV the best thing to do is to get a hackable TV like most android based models, replace the launcher, strip out system apps and telemetry with ADB and start fresh, then either leave it offline or use filtering to only allow access to the services you approve.

Aussie here, We’re still very much a car centric country, but for major public events we are pretty much hardwired to use public transport. I dont know what the actual parking capacity of the MCG is, but Marvel Stadium (Docklands) is only 500 cars with 55000 seats(not including the many nearby free and paid parking locations), that is much smaller than the MCG at over 100000 capacity, one of the worlds highest capacity stadiums despite our puny population.

Apart from most stadiums having extensive train, bus and drop-off access, we also have Park and Ride programs that can temporarily scale up to cover events like this which can basically turn any unused land into a large temporary carpark with dedicated bus services that take you either to the venue directly or to the local train station when they both have limited parking.

Yip, I have a Linux VM running on one of my boxes in the garage that is plugged into a video matrix so I can bring it up on any screen in the house, I use the pi to connect Keyboard/Mouse/controllers etc to that when I’m using it.

I use Ubooquity and Komga, both mainly for the OPDS service which I access on various devices.

Ubooquity is good for basic book and file serving, but does support graphics. Komga is very much graphic focussed and is very good at it.

I replaced 4x Pi4 4gb with a single N95 mini PC with 16gb ram and wont look back.

Only PI left in my home is just running a 24/7 USBIP bridge.

the only reason to use a pi is if you need GPIO pins for custom devices.

In most cases yes, but hdd space is cheap enough that lossless compression is just the best option. Can always use them as originals to spin off mp3s or other compressed files when needed.

300cds would only be around 120 gigs flac compressed