• 0 Posts
  • 212 Comments
Joined 1 year ago
cake
Cake day: June 7th, 2023

help-circle




  • VNC might have seen improvements over the years, but last time tried it, it didn’t handle high resolution/detail well at all. RDP can stream practically any media in close to real time, as to where VNC really broke down if you tried to change too much of the screen at once. Ideally, there’d probably be a new open screen sharing standard that used modern encoding and decoding to allow for high bandwidth connections smoothly. Moonlight gets close, but isn’t really designed as an RDP/VNC replacement.








  • Others have given you a good idea, but since you appear to be using Unifi for switch and firewall, o can give you a clear answer: Don’t set vlan on the Synology. Set it as the “Native” VLAN on the switch port going to the Synology.

    Synology can be vlan aware, but you don’t need it. Let the switch do the talking.

    On the Synology I recommend putting it on DHCP while you test. Once it starts getting an IP in the right subnet, you can then switch it to static. Just make sure your gateway is right, putting it wrong will cause the device to not be able to reach outside its own subnet.







  • It can be done, but it makes a worse product. EVs are built to fit batteries and motors in the most optimal place. Likewise with ICE cars with engines and transmissions. What you end up doing is shoving batteries in the engine compartment which is shaped wrong and you significantly change the balance of the car. You leave much of the expensive parts of the ICE car, while adding more expensive parts. It just doesn’t work well in practice. If you are going to spend time engineering, it is better to engineer a proper EV than try to shoehorn an EV into a size 6.